12V 6A-24V 3A Automatic Pulse Repairing Battery Charge Device for Lithium Leadacid LiFePO4 Batteries Car Battery Charger

-12V 6A - 24V 3A
-Auto detect battery type
-Auto off smart charging
-Automatic pulse repairing

MAIN FEATURES:
-High efficiency (>85%).
-Lithium, Lead-Acid, LiFePO4 battery type can selectable.
-The 7-stage microprocessor controlled charging process provides  the best possible application and enables efficient
 battery charging.
-Charging voltage adapts to temperature to prevent over or under battery charging.
-Capable of recharging severely discharged or heavily sulfated battery.
-Reverse polarity protection, short circuit protection, over charge protection, parks free contact.
-LCD display: voltage, current, temperature etc.
-Ease of use. Clear charging status display.
-Full microprocessor controlled.
-Does not over charge your battery even it is kept connected in any mode.

CHARGER MODES:
LITHIUM BATTERIES MODE: For charging 12.6V or 25.2V Lithium batteries. When selected, the Lithium blue LED will illuminate. For use on batteries when Battery Management System (BMS) only.
LEAD-ACID BATTERIES MODE: For AGM , SLA, WET, DEEP CYCLE, Calcium Batteries.
MOTORCYCLE AND LIFEPO4 BATTERIES MODE: For Motorcycle batteries and LiFePO4 batteries.
REPAIR MODE (16HOURS) :An advanced battery recovery mode for repairing and storing, old, idle, damaged, stratified or sulfated.
CHARGE MODE SELECT BUTTON: After charging for 30 seconds, the mode button will be locked. If you want to use it again, need to remove the alligator clip from the battery.

TECHNICAL SPECIFICATIONS:
Model: ZYX-J40
Type: Smart & Automatic
AC input: 100-240V 50/60HZ
Output Voltage: 12V / 24V Auto
Output Current: 12V 6A & 24V 3A
Output Volt No Load: 13.8V / 27.6V
Minimum Start Volt: >2.0V
Input Power With Load: Max. 110W
Input Power No Load:  2.8W

Customer comments

Author/Date Rating Comment
Customer Reviews
0 / 5
Total 0 Ratings


Write a review